Cleaners

Image Armor DTG printer cleaning solution is designed to completely flush your direct to garment printer of any inks. Cleaning Solution should not be watered down or left in the printer for extended periods of time. This is the only solution that Image Armor recommends using when changing ink sets.For extra robust cleaning of the entire bulk ink system lines and printhead. DO NOT USE THE PRINTER CLEANING SOLUTION FOR LONG TERM STORAGE OF YOUR PRINTER AS THIS CAN CAUSE DAMAGE TO YOUR LINES AND...

Image Armor Flushing Solution was designed to completely flush out Image Armor Ink Cleaning Solution prior to long-term storage. Typically the printer will be re-inked and be used for printing after using the cleaning solution and will not require flushing, but if you are preparing for long-term storage, the cleaning solution must be completely flushed out to prevent damage to printer components. View MSDS Sheet ...

Kodak Specialty Capping Solution is specifically formulated to keep dtg ink in a wet state. It will help to prevent exposed components from drying out, especially in low humidity conditions. It is recommended to be used daily and applied to all waste ink parts, after cleaning with CLEANING SOLUTION. This includes wiper blade(s), capping station, cleaning carts or pads. Apply 5-10ml of Kodak Capping Solution to the capping station before parking the printhead. Avoid pooling. Important: Capping...

Kodak Specialty Flushing Solution is a mild solvent solution. It can be used as separation barrier in the ink train when changing from one brand of ink to another. It is also used for long term storage in printer ink train to prevent ink clogging. Safety Data Sheet for Kodak Specialty Flushing Solution

These foam swabs are perfect for cleaning hard to reach places in DTG printers. The polyurethane foam is highly absorbant yet firm enough to effectively clean hard to reach areas and delicate parts on DTG printers such as print heads and wipers. Safe for use with DTG cleaning solutions. Sold as individual swabs.

Rubber Cleaner and Rejuvenator for DTG Vipers and Raptors. Use this special spray rubber cleaner and rejuvenator for cleaning conveyor belts on DTG Vipers and Raptors. Removes ink from the rubber belts, preventing hardening which can shorten the lifespan of these parts.

Blast away dust and dirt with the Big Shot by AlbaChem. This duster spray is ideal for blowing out lint and dust from sewing, embroidery, and long-arm machines as well as computers, electronics, and other machinery. The compressed air is clean, dry, and odorless and the extention tube allows you to clean out tight and hard-to-get-to areas. NOTE: Can only be shipped via UPS Ground/Flammable product.