Products 1-30 of 30
Show
DTGBLACK-V02-EIGHT
Availability: In Stock
Availability: In Stock
Item #: DTGBLACK-V02-EIGHT -
Genuine DTG Ink - 8 oz Black is a pigment garment printer ink designed to be compatible with DTG brand t shirt printing machines or "direct to garment printers", and other Epson based direct to garment printer machines. Genuine DTG Inks are certified to have been stored correctly and agitated regularly if required and have been deemed the best garment printer inks available by the manufacturer of DTG Printers. Our garment printer inks are also available in larger sizes. Offered in 8oz/250ml...
DTGWHITE-V02
Availability: In Stock
Availability: In Stock
Item #: DTGWHITE-V02 -
DTG Bright WHITE V02 Ink is the solution for being able to print on dark colored, cotton garments with your DTG printer. The Bright White ink comes in 16oz/500ml bottles and is filled to the 500ml level. Works best at a comfortable room temperature. This product works exclusively with our DTG White Ink Pre-Treatment and DTG Bright V02 ink system.
DTGBLACK-V02-LITER
Availability: In Stock
Availability: In Stock
Item #: DTGBLACK-V02-LITER -
Genuine DTG Ink - 1 Liter Black Black is often the most important color when printing a custom t-shirt with a direct to garment printer or "t shirt printing machine", and Genuine DTG Black is certified by the manufacturer to help you get the most vivid image possible using your DTG M2, Viper, M4 or older DTG Printer. Our garment printer inks are meant to be used as a set, so please make sure you're using Genuine DTG Cyan, Yellow, Magenta and White garment printer inks as well. Offered in...
DTGWHITE-V02-LITER
Availability: In Stock
Availability: In Stock
Item #: DTGWHITE-V02-LITER -
DTG Bright WHITE V02 Ink is the solution for being able to print on dark colored, cotton garments with your DTG printer. The Bright White ink comes in 32oz/1000ml bottles and is filled to the 1000ml level. Works best at a comfortable room temperature. This product works exclusively with our DTG White Ink Pre-Treatment and DTG Bright V02 ink system.
DTG-IAD-001G
Availability: In Stock
Availability: In Stock
Item #: DTG-IAD-001G -
Image Armor DARK is used with dark-colored and black garments. It allows the white layer of ink to set faster so the CMYK inks set better, providing the best ink coverage and superior washability. Image Armor's DARK Formula is safe to use with DuPont brand inks and is also safe for two-pass printing. This is the pretreatment that direct-to-garment printers everywhere are raving about. If you've been less than satisfied with your DTG prints, you haven't tried Image Armor. For use on dark...
DTG-IAUD-001G
Availability: In Stock
Availability: In Stock
Item #: DTG-IAUD-001G -
Currently shipping from our Clearwater, FL warehouse. Not available for pickup in Fort Worth, TX. Image Armor ULTRA is used with dark-colored and black garments. It allows the white layer of ink to set faster so the CMYK inks set better, providing the best ink coverage and superior washability. Image Armor ULTRA was designed for non-Dupont inks. This is the pretreatment that direct-to-garment printers everywhere are raving about. If you've been less than satisfied with your DTG prints, you...
DTG-IAL-001G
Availability: In Stock
Availability: In Stock
Item #: DTG-IAL-001G -
Image Armor LIGHT is used with white and light-colored garments. Pretreating garments is optional when no white ink underbase is being printed - the ink will bond to the garment without pre-treating. But if you want the sharpest image quality, the most vibrant colors, and superior washability, pretreating is required. Image Armor LIGHT is specifically formulated for this type of print and gives you options - it can be used with or without a white underbase (other pretreatments require the...
IA-PT-L-5Gallon
Availability: In Stock
Availability: In Stock
Item #: IA-PT-L-5Gallon -
Image Armor LIGHT is used with white and light-colored garments. Pretreating garments is optional when no white ink underbase is being printed - the ink will bond to the garment without pre-treating. But if you want the sharpest image quality, the most vibrant colors, and superior washability, pretreating is required. Image Armor LIGHT is specifically formulated for this type of print and gives you options - it can be used with or without a white underbase (other pretreatments require the...
IA-PT-U-5Gallon
Availability: In Stock
Availability: In Stock
Item #: IA-PT-U-5Gallon -
Image Armor ULTRA is used with dark-colored and black garments. It allows the white layer of ink to set faster so the CMYK inks set better, providing the best ink coverage and superior washability. This is the pretreatment that direct-to-garment printers everywhere are raving about. If you've been less than satisfied with your DTG prints, you haven't tried Image Armor. INSTRUCTIONS AND TIPS: DO NOT mix down Image Armor - it is ready to use. Always shake the container before using or pouring...
IA-PT-D-5Gallon
Availability: In Stock
Availability: In Stock
Item #: IA-PT-D-5Gallon -
Image Armor DARK is used with dark-colored and black garments. It allows the white layer of ink to set faster so the CMYK inks set better, providing the best ink coverage and superior washability. Image Armor's DARK Formula is safe to use with DuPont brand inks and is also safe for two-pass printing. This is the pretreatment that direct-to-garment printers everywhere are raving about. If you've been less-than satisfied with your DTG prints, you haven't tried Image Armor. For use on dark...
IA-ICS1L
Availability: In Stock
Availability: In Stock
Item #: IA-ICS1L -
Image Armor DTG printer cleaning solution is designed to completely flush your direct to garment printer of any inks. Cleaning Solution should not be watered down or left in the printer for extended periods of time. This is the only solution that Image Armor recommends using when changing ink sets.For extra robust cleaning of the entire bulk ink system lines and printhead. DO NOT USE THE PRINTER CLEANING SOLUTION FOR LONG TERM STORAGE OF YOUR PRINTER AS THIS CAN CAUSE DAMAGE TO YOUR LINES AND...
IA-IFSL
Availability: In Stock
Availability: In Stock
Item #: IA-IFSL -
Image Armor Flushing Solution was designed to completely flush out Image Armor Ink Cleaning Solution prior to long-term storage. Typically the printer will be re-inked and be used for printing after using the cleaning solution and will not require flushing, but if you are preparing for long-term storage, the cleaning solution must be completely flushed out to prevent damage to printer components. View MSDS Sheet ...
7458052-Kodak-CS-250ML
Availability: In Stock
Availability: In Stock
Item #: 7458052-Kodak-CS-250ML -
Kodak Specialty Capping Solution is specifically formulated to keep dtg ink in a wet state. It will help to prevent exposed components from drying out, especially in low humidity conditions. It is recommended to be used daily and applied to all waste ink parts, after cleaning with CLEANING SOLUTION. This includes wiper blade(s), capping station, cleaning carts or pads. Apply 5-10ml of Kodak Capping Solution to the capping station before parking the printhead. Avoid pooling. Important: Capping...
7458078-Kodak-FLS-1000ML
Availability: In Stock
Availability: In Stock
Item #: 7458078-Kodak-FLS-1000ML -
Kodak Specialty Flushing Solution is a mild solvent solution. It can be used as separation barrier in the ink train when changing from one brand of ink to another. It is also used for long term storage in printer ink train to prevent ink clogging. Safety Data Sheet for Kodak Specialty Flushing Solution
TechSpray2306-1000
Availability: In Stock
Availability: In Stock
Item #: TechSpray2306-1000 -
These foam swabs are perfect for cleaning hard to reach places in DTG printers. The polyurethane foam is highly absorbant yet firm enough to effectively clean hard to reach areas and delicate parts on DTG printers such as print heads and wipers. Safe for use with DTG cleaning solutions. Sold as individual swabs.
CLN-RUBREJ
Availability: In Stock
Availability: In Stock
Item #: CLN-RUBREJ -
Rubber Cleaner and Rejuvenator for DTG Vipers and Raptors. Use this special spray rubber cleaner and rejuvenator for cleaning conveyor belts on DTG Vipers and Raptors. Removes ink from the rubber belts, preventing hardening which can shorten the lifespan of these parts.
A1340
Availability: In Stock
Availability: In Stock
Item #: A1340 -
Blast away dust and dirt with the Big Shot by AlbaChem. This duster spray is ideal for blowing out lint and dust from sewing, embroidery, and long-arm machines as well as computers, electronics, and other machinery. The compressed air is clean, dry, and odorless and the extention tube allows you to clean out tight and hard-to-get-to areas. NOTE: Can only be shipped via UPS Ground/Flammable product.
CI-CleanWIPES-150-4X4
Availability: In Stock
Availability: In Stock
Item #: CI-CleanWIPES-150-4X4 -
For the daily maintenance of your Compress UV equipment and all other printers that benefit from using CleanWipes. Clean, cut and sealed edges. No fraying from knife-cut style wipes. Classification level: Class 10-100 / ISO 4-5 Bag of 150 pieces.
CP-AH
Availability: In Stock
Availability: In Stock
Item #: CP-AH -
This cleaning pick is for the removal of dried ink and residue from capping station hard surfaces and wiper blade track on your DTG Printer.
JG30CC-LL-10
Availability: In Stock
Availability: In Stock
Item #: JG30CC-LL-10 -
Large syringe for cleaning and maintenance of your DTG Printer. Please refer to your documentation for specific instructions.
CP-SL
Availability: In Stock
Availability: In Stock
Item #: CP-SL -
This cleaning pick is for the removal of dried ink and residue from capping station hard surfaces and wiper blade track on your DTG Printer.
Ink-funnel
Availability: In Stock
Availability: In Stock
Item #: Ink-funnel -
This funnel is to fill your DTG ink cartridges.
Ink strainer
Availability: In Stock
Availability: In Stock
Item #: Ink strainer -
The white ink strainer is used when refilling the ink compartment on DTG printers. This is for white ink only.
DTGSPRAYBTL
Availability: In Stock
Availability: In Stock
Item #: DTGSPRAYBTL -
The Half Gallon Handheld Sprayer has an adjustable nozzle to spray a fine mist - the most economical method of applying DTG Pretreatment to garments. Trigger can be locked for continuous spray. Large, easy-to-fill opening. Easy to grip ergonomic handle.
BQ-ACC-K01-0022
Availability: In Stock
Availability: In Stock
Item #: BQ-ACC-K01-0022 -
Kraft paper is perfect for giving a smooth matte finish when heat pressing DTG prints. Great for heat transfers too! One sheet of Kraft paper is good for up to 75 presses (or when the sheet becomes brittle). This item has special shipping requirements to prevent crushing the paper. If ordering multiple quantities, please call for a shipping charge adjustment.
FLAT-TEFLON-1721
Availability: In Stock
Availability: In Stock
Item #: FLAT-TEFLON-1721 -
Flat Teflon Sheets are a must have for anyone using a heat press on a regular basis. These 17" X 21" sheets protect your garments from the heat of the press and add a great finish for DTG shirts. PS - Can also be utilized in every other possible non-stick, protect-from-the-heat-press use you can think of. Eg: rhinestones, vinyl, spangles, patches, grilled cheese sandwiches, etc, etc.
1275979
Availability: In Stock
Availability: In Stock
Item #: 1275979 -
Replacement Wiper for DTG HM1
1419222
Availability: In Stock
Availability: In Stock
Item #: 1419222 -
DTG Damper for Summit DTG or any DTG Printers using Epson 9800 or Epson 2400. Also used with Kiosk II with WIMS II.
105616700
Availability: In Stock
Availability: In Stock
Item #: 105616700 -
DTG Damper for DTG Printers using Epson 2200 (Kiosk - Not to be used with white channels on WIMS II)
LCF-22100
Availability: In Stock
Availability: In Stock
Item #: LCF-22100 -
DTG White Ink Filter for WIMS II LCF-22100