This is a reformulation of the original "Viper Anti-Venom" cleaning and maintenance solutions. It has been formulated to be used for both internal AND external cleaning of DTG pretreatment residues.
Image Armor Pretreat Machine Cleaning Solution are designed to help keep your pretreatment machine running cleaner and smoother. It helps break down the solids in the pretreatment solution that can clog nozzles, spray heads and tubes that can cause poor system performance. The Image Armor Pretreat Cleaning Solution is non-flammable, biodegradable, environmentally friendly, has low VOC, zero GWP, is non-ozone depleting, halide free and non-corrosive. Regular cleaning with the solution will help provide better, more consistent and even spray patterns over the life of your machine.
Use:
The Cleaning Solution are designed to be re-circulated through your machine via the H2O. Fluid IN and OUT ports. It is highly suggested that you utilize a 1 gallon container like the cleaner 1 gallon sized container as your re-circulation fluid holder.
How to Use:
1. Empty the machine of pretreatment.
2. Place the water IN and OUT fluid lines into the 1 gallon container of Image Armor Cleaning Solution.
3. Run a Fluid FILL routine as per the machine instructions.
4. To fully clean and maintain your machine, run 3-5 cycles of the fluid FILL routine as per Step 3 above.
5. Empty the pretreat machine of Cleaning Solution by running a Fluid Empty routine.
6. Place the water IN line back into a clean container of distilled water.
7. Place the water OUT line back into your waste water container.
8. Run two Fluid FILL routines per the machine instructions using distilled water to remove the residue of the cleaner from the machine's lines, pump and spray heads.
9. Empty the water from the machine using the Fluid EMPTY routine on the machine.
10. You are ready to re-introduce pretreatment into the machine and start pretreating.
Cleaning Schedule:
The Image Armor Cleaning Solution should be run through the pretreatment machine once per week. This will help reduce the buildup of the pretreatment polymers in the fluid system and can prevent additional maintenance.
Replacing the Cleaning Solution:
The Cleaning Solution should be only used in a re-circulation scenario 4-6 times. Dispose of the solution accordingly and replace with fresh cleaning solution on a regular basis.
View MSDS Sheet
Item Name: Image Armor Pretreat Machine Cleaning Solution - One Gallon
Item Number: IA-PT-CS-Gallon
Item Price: $49.95
Image Armor Pretreat Machine Cleaning Solution is designed to help keep your pretreatment machine running cleaner and smoother. It helps break down the solids in the pretreatment solution that can clog nozzles, spray heads and tubes that can cause poor system performance. The Image Armor Pretreat Cleaning Solution is non-flammable, biodegradable, environmentally friendly, has low VOC, zero GWP, is non-ozone depleting, halide free and non-corrosive. Regular cleaning with the solution will help provide better, more consistent and even spray patterns over the life of your machine.